无遮挡吃胸膜奶免费看视频,欧美三级全黄牲交视频,无码精品日韩专区第一页,八戒八戒看片在线观看网盘

在渣漿泵和壓縮天然氣中的應用

液化天然氣(LNG)就是將天然氣從礦場開采出來，經過預處理工藝后，采用先進的制冷工藝,變成液態(- 162C ,0.1MPa)的天然氣。在天然氣液化裝置中，壓縮機除了用于天然氣的增壓和輸送外，還有用于不同溫度制冷的壓縮機。所采用的壓縮機主要有往復式壓縮機、離心式壓縮機以及軸流式壓縮機。往復式壓縮機通常用于天然氣處理量比較小的液化裝置，離心式壓縮機則用于大型液化裝置，軸流式壓縮機主要用于混合制冷劑循環裝置。
    自2006年國內首座LNG接收站在深圳大鵬灣建成投產以來，至2013年我國已建成投產、在建及規劃的LNG接收站達到20多座,其中已建成投產LNG接收站9座,年進口液化天然氣達到1700x 10*t,預計2020年將達到6000X10*t的進口規模。在LNG接收站內，液化天然氣的輸送和加壓主要采用大型立式潛液泵;站內蒸發氣體(BOG)的回收利用則采用往復式壓縮機加壓進行冷凝回收.主要有臥式對稱平衡和立式迷官密封兩種結構型式。潛液泵為離心泵，要求在低溫下軸封可靠電動機冷卻和軸承潤滑均采用低溫LNG.潛液泉本身軸向力平衡非常重要.直接影響軸承使用壽命和泵的維修周期。渣漿泵廠家

在壓縮天然氣(CNG)加壓站通常采用往復式壓縮機最高可將天然氣壓縮到25MPa.再充裝給氣瓶轉運車送至城鎮布點的CNG汽車加氣站或CNG供應站。

Application in slurry pump and compressed natural gas

Liquefied natural gas (LNG) is the natural gas extracted from the mine. After pretreatment, it is transformed into liquid (- 162c, 0.1MPa) natural gas through advanced refrigeration process. In the natural gas liquefaction unit, the compressor is not only used for pressurization and transportation of natural gas, but also for refrigeration at different temperatures. The compressors used are mainly reciprocating compressors, centrifugal compressors and axial compressors. Reciprocating compressor is usually used in the liquefaction unit with relatively small natural gas processing capacity, centrifugal compressor is used in the large-scale liquefaction unit, and axial compressor is mainly used in the mixed refrigerant circulation unit.

Since the first LNG terminal in China was built and put into operation in Dapeng Bay, Shenzhen in 2006, there are more than 20 LNG terminals that have been built and put into operation, under construction and under planning in China by 2013, including 9 LNG terminals that have been built and put into operation, and the annual import of LNG is 1700x10 * t, which is expected to reach the import scale of 6000x10 * t in 2020. In LNG receiving station, large vertical submerged pump is mainly used for LNG transportation and pressurization; reciprocating compressor is used for condensation and recovery of bog in the station. There are mainly two types of structures: horizontal symmetrical balance and vertical labyrinth seal. The submerged pump is a centrifugal pump, which requires reliable shaft seal motor cooling and bearing lubrication at low temperature. The axial force balance of the submerged spring itself is very important, which directly affects the service life of the bearing and the maintenance cycle of the pump. Slurry pump manufacturer

In compressed natural gas (CNG) compression station, the reciprocating compressor is usually used to compress the natural gas to 25MPa at most, and then fill it to the gas cylinder transfer vehicle and send it to the CNG automobile filling station or CNG Supply Station of the town distribution point.