无遮挡吃胸膜奶免费看视频,欧美三级全黄牲交视频,无码精品日韩专区第一页,八戒八戒看片在线观看网盘

渣漿泵的基礎知識泵的分類及型號

第一節泵的分類及型號
一、 泵的定義
    泵是一種抽送液體或增加液體能量的機器，即把原動機的機械能變為液體能量的機器統稱為泵。

二、泵的分類

按其作用原理，可將泵分為三大類，如圖2-1所示。
1.葉片式泵
    它是利用旋轉葉 輪的葉片和液體相互作用來輸送液體或增加液體的能量。主要有離心泵、混流泵、軸流泵和旋渦泵等。其特點是流量大、揚程較低、體積較小。這其中旋渦泵為小流量高揚程泵;混流泵和軸流泵為大流量低揚程泵;離心泵介于它們之間，使用范圍最為廣泛。
2.容積式泵
    它是利用工作室容積周期性變化來輸送液體或增加液體的能量。如往復泵(活塞泵) (圖2-2)、柱塞泵、隔膜泵、轉子泵(圖2-3)、齒輪泵(圖2-4)、螺桿泵(圖2-5)等。其特點是流量小、揚程高、體積大。
3.其他類型泵
    是利用流體能量來輸送液體的泵，如射流泵(圖2-6)、 水錘泵(圖2-7)。
    圖2-8表示了各種類型泵的使用范圍。從圖中可以看出， 離心泵所占的區域最大，使用也最為廣泛。其流量在5 ~ 20000m3/h;揚程在8 ~2800m的范圍內。渣漿泵廠家

Basic knowledge of slurry pump classification and model of pump

Section I classification and model of pump

I. definition of pump

Pump is a kind of machine that pumps liquid or increases liquid energy, that is, the machine that transforms the mechanical energy of prime mover into liquid energy is called pump.

II. Classification of pumps

According to its principle of action, pumps can be divided into three categories, as shown in Figure 2-1.

1. Vane pump

It uses the interaction between the blades of the rotating impeller and the liquid to deliver the liquid or increase the energy of the liquid. It mainly includes centrifugal pump, mixed flow pump, axial flow pump and vortex pump. It is characterized by large flow, low head and small volume. Among them, the vortex pump is a small flow high head pump; the mixed flow pump and the axial flow pump are large flow low head pumps; the centrifugal pump is between them and the most widely used.

2. Positive displacement pump

It uses the periodic change of the volume of the working room to deliver liquid or increase the energy of liquid. For example, reciprocating pump (piston pump) (Figure 2-2), plunger pump, diaphragm pump, rotor pump (Figure 2-3), gear pump (Figure 2-4), screw pump (Figure 2-5), etc. It is characterized by small flow, high head and large volume.

3. Other types of pumps

It is a pump that uses fluid energy to deliver liquid, such as jet pump (Fig. 2-6) and water hammer pump (Fig. 2-7).

Figure 2-8 shows the range of use of various types of pumps. As can be seen from the figure, centrifugal pumps occupy the largest area and are most widely used. Its flow is 5 ~ 20000m3 / h, and its lift is 8 ~ 2800m. Slurry pump manufacturer